When should a contractor collect a deposit? | Artículos | Contractor SystemsSaltar al contenido

Artículos

When should a contractor collect a deposit?

Build a contractor deposit policy around the cash your company commits before work starts, the job's payment milestones, and the rules where you operate.

Por Kyle Burt·Founder, Contractor Systems·9 de noviembre de 2026·7 min de lectura

A homeowner reviewing project and payment details on a tablet with a contractor.

A contractor deposit should protect the company from real pre-work exposure. It should not be a random percentage copied from another contractor.

Some jobs require almost no cash before the truck rolls. Others require custom materials, permits, equipment, engineering, or a subcontractor commitment weeks before production begins. Using one deposit rule for both jobs is easy for the office, but it may be wrong for the work and illegal where you operate.

Build the policy in this order: classify the job, calculate what the company must commit, check the local rules, connect the deposit to a written payment schedule, and make sure production can see whether the payment cleared.

This is an operating framework, not legal advice. Home-improvement payment rules vary by state and can also change by project type or local jurisdiction. Have your contract and payment schedule reviewed for every place where you work.

Start with the cash you commit before the job

Do not begin with “We collect 50 percent.” Begin with the costs and obligations that become real before useful work exists at the property.

That pre-work exposure may include:

  • Nonreturnable or custom materials
  • Equipment that must be ordered for that customer
  • Permit, engineering, or design costs
  • A subcontractor commitment that cannot be cancelled without cost
  • Delivery, storage, or mobilization charges
  • Dedicated preparation that the contract treats as paid work

Separate those items from expenses that happen later. Payroll for work you have not performed, profit you have not earned, and a vague cash cushion are not the same as a documented material order.

The deposit does not have to equal the full exposure. Local law may cap it below that amount. Supplier terms, company cash reserves, financing, and later milestones may cover the difference. The point is to know the gap before you promise a start date.

Use different rules for different job types

A clean contractor deposit policy usually has a few lanes, not one number.

A standard service call may use a disclosed diagnostic fee rather than a project deposit. The customer is paying for the visit and diagnosis. The guide to contractor service-call and diagnostic fees covers that decision.

A short repair with stocked material may require no deposit if the company can complete and invoice it in one visit. Collecting money before every small repair can add office work and customer friction without protecting much cash.

A replacement or installation may justify a deposit when equipment, permits, or materials must be committed before the scheduled date. A remodel, pool, outdoor-living project, or other long job may need a deposit plus progress payments tied to visible milestones.

Custom work deserves its own review. Cabinets, specialty windows, fabricated metal, unusual fixtures, and made-to-order equipment can create real exposure early. That does not mean the contractor may collect any amount it wants. It means the contract should identify the item, its cost, when it must be ordered, and which local rule applies.

Check the rule before you quote the amount

There is no safe national deposit percentage for residential contractors.

California’s Contractors State License Board says the down payment for a covered home-improvement job or swimming pool cannot exceed $1,000 or 10 percent of the contract price, whichever is less. Its current guidance says there is no special-order-material exception to that limit.

Massachusetts home-improvement contract guidance uses a different rule. For covered work, it says a deposit paid before work starts cannot exceed one-third of the total contract price or the actual cost of special-order or custom material or equipment that must be ordered in advance, whichever is greater. It also requires the payment schedule to state dates and dollar amounts.

New York adds another operating issue. The New York Attorney General’s home-improvement fact sheet says covered contractors must put customer payments received before substantial completion into a trust account for that job or provide the required bond protection. Its guidance also says progress payments must bear a reasonable relationship to work done, materials purchased, or other project costs.

Those examples are not a menu. A California contractor cannot choose the Massachusetts rule because it fits the material order better. Build the policy from the licensing authority, statute, contract requirements, and legal guidance that apply to the actual job.

Keep a simple rule sheet by jurisdiction. Record the covered project types, contract threshold, deposit cap, special-order treatment, cancellation period, required notices, payment-handling rule, and final-payment restriction. Review it when the law changes and before entering a new service area.

Turn the rest into earned milestones

A deposit is only the first line of the payment schedule.

Do not write “payments due as work progresses.” Name the event that earns each payment and the proof the office needs before sending the invoice. A milestone might be permit issuance, delivery of identified materials, completion of demolition, rough inspection approval, equipment startup, substantial completion, or final closeout. The right milestones depend on the trade and contract.

Tie each milestone to work or cost that the customer can understand. Avoid a schedule that collects nearly the whole contract before the difficult part begins. Also avoid waiting until the end to bill for weeks of completed work unless the company deliberately priced and financed that risk.

For each payment, record:

  • The dollar amount, not only a percentage
  • The event that makes it due
  • The person who verifies the event
  • The evidence required, such as delivery receipt, photo, inspection, or customer approval
  • The invoice date and payment terms
  • What happens to the schedule if payment is late

Massachusetts requires dates and dollar amounts for covered contracts. California says payments cannot exceed the value of work performed, apart from the permitted down payment. Even when another jurisdiction uses different wording, a specific schedule is easier for the customer, project manager, and bookkeeper to follow.

Do not schedule from a promise to pay

Sales may call the job sold when the customer signs. Production needs a stricter gate.

Before a job moves to “ready for production,” confirm that the contract is complete, any cancellation period has been handled, the deposit invoice matches the agreement, the payment cleared, and the money was recorded or protected as required. Also confirm that permits, selections, financing, and material orders are ready for the next step.

The sales-to-production handoff checklist treats payment status as one part of job readiness. That distinction matters. “Customer said the check is coming” is not a cleared deposit. A receipt screenshot is not the same as money in the right account. A card authorization that later fails should not release a custom order.

Give the office one visible status:

  1. Contract sent
  2. Contract signed
  3. Deposit due
  4. Deposit received and verified
  5. Cancellation period or other hold pending
  6. Released for ordering or production

Only the last status releases the next commitment. If the customer changes the scope before production, use the written contractor change-order process instead of quietly changing the deposit or payment schedule in an invoice note.

Show the customer what the deposit does

A customer may hear “deposit” and think the contractor wants free working capital. A vague contract gives them no reason to think otherwise.

Explain what happens next. If the payment releases an equipment order, say which equipment. If it reserves production after a cancellation period, state the expected scheduling step. If state law requires trust handling or a bond, provide the required disclosure and proof.

Also write the cancellation and refund treatment in plain language. Separate a refundable scheduling payment from a lawfully nonrefundable commitment, if your jurisdiction and contract allow that distinction. Do not call every payment nonrefundable and hope the label settles the issue. The underlying work, order, cancellation right, and local rule still matter.

The office should give the same explanation as sales. The bookkeeper should apply the same payment to the same job. Production should see the same release status. One policy stops being one policy when every department describes it differently.

Audit three current jobs

Pick three jobs: a simple repair, a standard replacement, and a project with custom material or a long production schedule.

For each one, list the company’s commitments before work, the legal deposit limit, the amount in the signed contract, the payment milestones, the proof for each invoice, the current payment status, and the person allowed to release ordering or production.

If the deposit is just a percentage with no connection to those facts, rewrite the policy before the next estimate goes out. If sales, accounting, and production show different payment status, fix the handoff before another custom order is placed.

Your field-service and accounting tools may continue to own estimates, invoices, and payments. Contractor Systems can help keep the customer conversation and system handoffs connected. Review the available integrations and watch the lead-to-booking workflow, then make sure the approved estimate, deposit status, and production release carry the same answer.

Sources

¿Quieres que nos encarguemos de esto por ti?

Contractor Systems es un solo sistema mensual para el sitio web, la bandeja de entrada, el seguimiento y las reseñas. $297/mes. Sin contratos en los planes mensual y trimestral.

Más artículos

$297/mes

Un solo sistema

Míralo en acción